Thursday, December 6, 2018

Dispatcher's Panel- Part 4

The new track model board arrived on the railroad yesterday, and all I can say is- WOW! Tyler Woodward, the graphic designer at Awards of Excellence in Dayton, OH, did an incredible job of copying my drawing and engraving the panel. Below is a shot  of the results.






























Drawing the model board by hand allowed me to use the appropriate US&S symbols and schematics. I used the photo below of the C&O board from the New River Subdivision as a reference source. I also used information from Mike Burgett's Control Train Components website which can be found here: http://www.ctcparts.com/.






























The photo below shows a close-up of the engraving.






























Now that the board is installed, I'll go back and spray all of the sheet metal screws flat black.

A special shout out to Tyler Woodward for turning the board around so quickly. He sent me proofs of the artwork just a day after I delivered the original drawing. And the time it took from the initial phone conversation to installation on the dispatcher's panel was exactly one week. Just some really great service.


The last remaining pieces of hardware for the board are the photo etched aluminum switch, signal and lock plates from Mike Burgett. More to come on this. 

3 comments:

  1. Wow, I like it a lot! That is a superb job Tom, I toyed with a CTC panel for my layout early on...

    ReplyDelete
  2. Looking good, Tom. These things are really fun to dispatch with. More or less addicting.

    ReplyDelete